Frequently Asked Questions

WallUp!® - F.A.Q.

What is the WallUp!®?

An innovative product by Kittrich Corporation, the WallUp!® is an instant, portable privacy wall, capable of various configurations, providing personal privacy and temporary relief from outdoor elements.


What is the WallUp!® flag cloth screen material made out of?

The flag cloth screen (wall) is made of quality polyester. With proper care, cleaning and storage, it will last for years.


What holds it up?

Similar to some tents and tethered canopies, the WallUp!® uses stainless steel ground stakes and durable fiberglass support poles. To prevent rust on ground stakes, you may use a galvanizing spray. Clean and dry stakes after every use.


How easy is the set up?

The ground stakes are driven into the ground, preferably by using a rubber mallet, to “anchor” the support poles. The poles are inserted into the ground stakes to hold the flag screen cloth (wall) upright. The wall is then attached onto the poles. A cross bar is then inserted across the entire top of the wall through the corner pocket. It’s an easy set up and instructions are provided.


Where can the WallUp!® be set up?

The WallUp!® is best suited for a firm, yet penetrable surface (soil/dirt/loose gravel, etc.). In harder ground, you may achieve optimal set up and wind resistance.  When possible, it is best to anchor the WallUp!® at an angle slightly into the wind.


What are the stakes made of?

The four (4) ground stakes are solid steel. They can be inserted into the ground by hand or driven by rubber mallet, depending upon the ground surface hardness. The stakes are sharp objects and must always be handled with care by adults only. Keep them dry, clean, and stored in the tote bag to avoid rust or injury. Keep them away from small children at all times.


What are the support poles made of?

The collapsible, vertical support poles are 5/8″ thick and made of heavy duty fiberglass. When assembled together and kept in place with a metal flange, they are 6 feet tall. When disassembled, each half pole is 3 feet long, making for easy compact storage. Keep the support poles stored in the tote bag to avoid accidental bending or breakage.


How is the flag cloth screen (wall) cleaned?

Simply hand-wash the flag cloth screen (wall) with a mild liquid detergent and cold water. Hang dry before storing. The wall is a large 6’ x 12’ size, so it is not recommended for any machine washing, which may bunch or tear the wall.


What color(s) are available?

Black, Aqua, Green, White and Camo.


Are replacement parts available if they are lost or broken?

The WallUp!® has replacement parts, at a nominal charge, and are sold separately. However, the flag cloth screen and carry bags are not available as a replacement purchase.  Contact your retailer or Kittrich Corporation for replacement parts, where available.


How wind-resistant is it?

The WallUp!® can resist winds up to 15 mph.  For best results, use firm ground and anchor the ground stakes at an angle slightly into the wind.


© 2017-2018  WallUp!® a div. of Kittrich® Corporation. All rights reserved.